Model 190

  • Eliminates sample contamination during scanning electron microscope (SEM) operation
  • SEM can be used while the Cryo-Can is cooled, even on SEMs without airlocks
  • Contaminants condense onto a removable, cold surface
  • Can work either before or while the SEM is operating

Provides clean environment for SEM

The Cryo-Can provides a clean environment for SEM sample imaging and analysis. It helps eliminate chamber contamination resulting from sample outgassing and other sources. The Cryo-Can improves both imaging and analytical data quality. It is ideal for high beam current applications.

Uses SEM vacuum system

The Cryo-Can vacuum container is readily connected to one of the SEM chamber ports and does not need an independent vacuum system. A removable liquid nitrogen vessel is contained within the vacuum container.  Once the SEM chamber and Cryo-Can are evacuated, liquid nitrogen is introduced into the vessel of the Cryo-Can. The cold surface of the vessel traps contaminants outside the SEM chamber.

Removing the condensed contamination

The liquid nitrogen vessel is typically removed after 30 minutes to 5 hours of operation.  Removing the vessel while it is cold removes the condensed contamination from the SEM.  Placing a lid on the vacuum container seals the SEM chamber when the Cryo-Can is not in use. When the SEM vacuum system is activated, the Cryo-Can is evacuated along with the SEM chamber.

Once the liquid nitrogen vessel is emptied and placed onto a stand, both the vessel and the stand can be baked to regenerate the surface of the liquid nitrogen vessel, allowing it to be reused without reintroducing contamination into the SEM.